View B57885S0303F000_4526841.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NTC thermistors for temperature measurement
Leaded NTC thermistors, lead spacing 5 mm
Series/Type: Date:
B57885S February 2009
(c) EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Applications Temperature measurement and compensation Features High measuring accuracy Cost-effective Rugged design, epoxy resin encapsulation Tinned copper leads Lead spacing 5 mm Options Flexible coating of head and wires available on request Delivery mode Bulk (standard), cardboard tape, reeled or in Ammo pack on request General technical data Climatic category Max. power Resistance tolerance Rated temperature Dissipation factor Thermal cooling time constant Heat capacity Electrical specification and ordering codes R25 2.1 k 10 k 10 k 10 k 12 k 30 k
+ = Resistance tolerance F = 1% H = 3% J = 5%
Dimensional drawing
Dimensions in mm Approx. weight 130 mg
(IEC 60068-1) (at 25 C) P25 RR/RR TR (in air) (in air) th c Cth
55/155/56 100 1, 3, 5 25 approx. 4 approx. 10 approx. 40 mW % C mW/K s mJ/K
No. of R/T characteristic 1008 2003 2908 2001 2901 8018
B25/100 K 3560 1% 3980 1% 3460 1% 3920 1% 3760 1% 3964 1%
Ordering code B57885S0212+000 B57885S0103+001 B57885S0103+002 B57885S0103+003 B57885S0123+000 B57885S0303+000
Please read Cautions and warnings and Important notes at the end of this document.
Page 2 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Reliability data Test Storage in dry heat Standard IEC 60068-2-2 Test conditions R25/R25 (typical) < 2% Remarks No visible damage
Storage in damp heat, steady state Rapid temperature cycling Endurance Long-term stability (empirical value) R/T characteristics
Storage at upper category temperature T: 155 C t: 1000 h IEC Temperature of air: 40 C 60068-2-78 Relative humidity of air: 93% Duration: 56 days IEC Lower test temperature: 55 C 60068-2-14 Upper test temperature: 155 C Number of cycles: 100 Pmax: 100 mW t: 1000 h Temperature: 70 C t: 10000 h
< 1%
No visible damage No visible damage No visible damage No visible damage
< 2%
< 3% < 3%
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0
B57885S0212F000 1008 B25/100 = 3560 K, R25 = 2100 , TR = 25 C, RR/RR = 1% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 111520 82567 61583 46263 34999 26661 20423 15786 12254 9594 7570 6020 4811 3872 3133 2552 2100 1742 1441 1199 1008 851.4 105460 78386 58680 44237 33579 25661 19717 15285 11899 9341 7390 5891 4719 3807 3087 2520 2079 1721 1421 1180 990.2 834.6 117570 86747 64486 48289 36420 27661 21128 16287 12609 9847 7751 6149 4902 3937 3179 2584 2121 1764 1462 1219 1026 868.2 5.4 5.1 4.7 4.4 4.1 3.8 3.5 3.2 2.9 2.6 2.4 2.1 1.9 1.7 1.5 1.3 1.0 1.2 1.4 1.6 1.8 2.0 0.9 0.8 0.8 0.8 0.7 0.7 0.7 0.6 0.6 0.5 0.5 0.5 0.4 0.4 0.4 0.3 0.3 0.3 0.4 0.5 0.5 0.6
(%/K) 6.1 6.0 5.8 5.7 5.5 5.4 5.2 5.1 4.9 4.8 4.7 4.5 4.4 4.3 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4
Please read Cautions and warnings and Important notes at the end of this document.
Page 3 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0212F000 1008 B25/100 = 3560 K, R25 = 2100 , TR = 25 C, RR/RR = 1% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 717.6 702.2 732.9 2.1 0.6 608.0 594.0 622.0 2.3 0.7 519.0 506.2 531.8 2.5 0.8 444.8 382.1 329.3 285.4 248.3 217.1 190.6 167.2 147.2 130.0 115.0 102.3 91.17 81.32 72.69 65.20 58.61 52.91 433.2 371.5 319.7 276.7 240.4 209.9 184.0 161.3 141.8 125.0 110.5 98.14 87.38 77.85 69.51 62.28 55.93 50.43 456.5 392.6 338.9 294.1 256.2 224.3 197.1 173.2 152.7 134.9 119.6 106.4 94.96 84.79 75.87 68.12 61.29 55.38 2.6 2.8 2.9 3.1 3.2 3.3 3.4 3.6 3.7 3.8 3.9 4.0 4.2 4.3 4.4 4.5 4.6 4.7 0.9 0.9 1.0 1.1 1.2 1.2 1.3 1.4 1.5 1.6 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3
(%/K) 3.3 3.2 3.1 3.1 3.0 2.9 2.8 2.8 2.7 2.6 2.6 2.5 2.4 2.4 2.3 2.3 2.2 2.2 2.1 2.1 2.0
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0
B57885S0212H000 1008 B25/100 = 3560 K, R25 = 2100 , TR = 25 C, RR/RR = 3% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 111520 82567 61583 46263 34999 26661 20423 15786 12254 9594 7570 6020 4811 3872 3133 2552 2100 1742 103230 76735 57449 43312 32879 25128 19308 14969 11654 9149 7238 5770 4622 3729 3025 2469 2037 1686 119800 88399 65717 49214 37120 28194 21537 16602 12854 10039 7903 6269 4999 4014 3242 2635 2163 1799 7.4 7.1 6.7 6.4 6.1 5.8 5.5 5.2 4.9 4.6 4.4 4.1 3.9 3.7 3.5 3.3 3.0 3.2 1.2 1.2 1.2 1.1 1.1 1.1 1.0 1.0 1.0 1.0 0.9 0.9 0.9 0.9 0.8 0.8 0.8 0.9
(%/K) 6.1 6.0 5.8 5.7 5.5 5.4 5.2 5.1 4.9 4.8 4.7 4.5 4.4 4.3 4.1 4.0 3.9 3.8
Please read Cautions and warnings and Important notes at the end of this document.
Page 4 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0212H000 1008 B25/100 = 3560 K, R25 = 2100 , TR = 25 C, RR/RR = 3% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 1441 1392 1491 3.4 0.9 1199 1156 1243 3.6 1.0 1008 851.4 717.6 608.0 519.0 444.8 382.1 329.3 285.4 248.3 217.1 190.6 167.2 147.2 130.0 115.0 102.3 91.17 81.32 72.69 65.20 58.61 52.91 970.0 817.6 687.9 581.8 495.8 424.3 363.9 313.1 271.0 235.4 205.6 180.2 157.9 138.8 122.4 108.2 96.10 85.56 76.22 68.06 60.98 54.76 49.37 1047 885.3 747.3 634.2 542.2 465.4 400.3 345.5 299.8 261.1 228.7 200.9 176.6 155.6 137.5 121.9 108.5 96.79 86.41 77.33 69.42 62.47 56.44 3.8 4.0 4.1 4.3 4.5 4.6 4.8 4.9 5.1 5.2 5.3 5.4 5.6 5.7 5.8 5.9 6.0 6.2 6.3 6.4 6.5 6.6 6.7 1.1 1.2 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.2 3.3
(%/K) 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.1 3.0 2.9 2.8 2.8 2.7 2.6 2.6 2.5 2.4 2.4 2.3 2.3 2.2 2.2 2.1 2.1 2.0
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0
B57885S0212J000 1008 B25/100 = 3560 K, R25 = 2100 , TR = 25 C, RR/RR = 5% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 111520 82567 61583 46263 34999 26661 20423 15786 12254 9594 7570 6020 4811 3872 101000 75084 56217 42387 32179 24595 18900 14654 11408 8957 7087 5650 4526 3652 122030 90050 66949 50139 37820 28728 21945 16918 13100 10231 8054 6389 5095 4092 9.4 9.1 8.7 8.4 8.1 7.8 7.5 7.2 6.9 6.6 6.4 6.1 5.9 5.7 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.3 1.3
(%/K) 6.1 6.0 5.8 5.7 5.5 5.4 5.2 5.1 4.9 4.8 4.7 4.5 4.4 4.3
Please read Cautions and warnings and Important notes at the end of this document.
Page 5 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0212J000 1008 B25/100 = 3560 K, R25 = 2100 , TR = 25 C, RR/RR = 5% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 3133 2962 3304 5.5 1.3 2552 2100 1742 1441 1199 1008 851.4 717.6 608.0 519.0 444.8 382.1 329.3 285.4 248.3 217.1 190.6 167.2 147.2 130.0 115.0 102.3 91.17 81.32 72.69 65.20 58.61 52.91 2418 1995 1651 1363 1132 949.8 800.6 673.5 569.7 485.5 415.4 356.2 306.5 265.3 230.4 201.2 176.4 154.6 135.9 119.8 105.9 94.05 83.73 74.59 66.61 59.67 53.58 48.32 2687 2205 1834 1520 1267 1067 902.3 761.6 646.3 552.5 474.3 407.9 352.0 305.5 266.1 233.0 204.8 179.9 158.5 140.1 124.2 110.5 98.61 88.04 78.78 70.73 63.64 57.50 5.3 5.0 5.2 5.4 5.6 5.8 6.0 6.1 6.3 6.5 6.6 6.8 6.9 7.1 7.2 7.3 7.4 7.6 7.7 7.8 7.9 8.0 8.2 8.3 8.4 8.5 8.6 8.7 1.3 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.3 3.4 3.6 3.7 3.8 4.0 4.1 4.3
(%/K) 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.1 3.0 2.9 2.8 2.8 2.7 2.6 2.6 2.5 2.4 2.4 2.3 2.3 2.2 2.2 2.1 2.1 2.0
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0
B57885S0103F001 2003 B25/100 = 3980 K, R25 = 10000 , TR = 25 C, RR/RR = 1% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 975780 676500 475380 338310 243590 177530 130670 97228 73006 917770 639050 450920 322170 232840 170310 125780 93900 70729 1033800 713960 499840 354460 254340 184760 135550 100560 75282 5.9 5.5 5.1 4.8 4.4 4.1 3.7 3.4 3.1 0.8 0.8 0.7 0.7 0.7 0.7 0.6 0.6 0.6
(%/K) 7.4 7.2 6.9 6.7 6.5 6.2 6.0 5.8 5.6
Please read Cautions and warnings and Important notes at the end of this document.
Page 6 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0103F001 2003 B25/100 = 3980 K, R25 = 10000 , TR = 25 C, RR/RR = 1% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 55361 53797 56925 2.8 0.5 42332 32660 25392 19902 15709 12492 10000 8057 6533 5329 4372 3606 2991 2493 2089 1758 1486 1262 1076 921.6 792.2 683.6 592.5 515.3 449.2 392.8 343.9 301.9 266.5 235.9 209.3 186.2 166.1 41256 31918 24881 19552 15472 12332 9900 7955 6436 5239 4289 3531 2923 2432 2034 1709 1442 1223 1041 889.9 763.8 658.0 569.5 494.6 430.6 376.0 328.7 288.2 254.1 224.7 199.1 176.9 157.6 43409 33402 25902 20251 15947 12652 10100 8160 6629 5419 4454 3682 3059 2554 2144 1807 1530 1302 1112 953.3 820.7 709.1 615.4 536.0 467.8 409.6 359.0 315.5 278.9 247.2 219.5 195.5 174.6 2.5 2.3 2.0 1.8 1.5 1.3 1.0 1.3 1.5 1.7 1.9 2.1 2.3 2.5 2.6 2.8 3.0 3.1 3.3 3.4 3.6 3.7 3.9 4.0 4.1 4.3 4.4 4.5 4.6 4.8 4.9 5.0 5.1 0.5 0.4 0.4 0.4 0.3 0.3 0.2 0.3 0.4 0.4 0.5 0.5 0.6 0.7 0.8 0.8 0.9 1.0 1.0 1.1 1.2 1.3 1.4 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3
(%/K) 5.5 5.3 5.1 5.0 4.8 4.7 4.5 4.4 4.3 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.1 3.0 2.9 2.9 2.8 2.7 2.7 2.6 2.5 2.5 2.4 2.4 2.3 2.3
R/T No. T (C) 55.0 50.0 45.0 40.0
B57885S0103H001 2003 B25/100 = 3980 K, R25 = 10000 , TR = 25 C, RR/RR = 3% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 975780 676500 475380 338310 898250 625520 441410 315400 1053300 727490 509350 361220 7.9 7.5 7.1 6.8 1.1 1.0 1.0 1.0
(%/K) 7.4 7.2 6.9 6.7
Please read Cautions and warnings and Important notes at the end of this document.
Page 7 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0103H001 2003 B25/100 = 3980 K, R25 = 10000 , TR = 25 C, RR/RR = 3% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 243590 227970 259210 6.4 1.0 177530 130670 97228 73006 55361 42332 32660 25392 19902 15709 12492 10000 8057 6533 5329 4372 3606 2991 2493 2089 1758 1486 1262 1076 921.6 792.2 683.6 592.5 515.3 449.2 392.8 343.9 301.9 266.5 235.9 209.3 186.2 166.1 166760 123170 91956 69269 52689 40409 31265 24374 19154 15157 12083 9700 7794 6305 5132 4202 3459 2863 2382 1992 1673 1412 1197 1019 871.5 748.0 644.4 557.7 484.3 421.6 368.2 321.9 282.2 248.8 220.0 194.9 173.1 154.3 188310 138170 102500 76742 58032 44256 34055 26410 20649 16261 12901 10300 8321 6760 5526 4542 3754 3119 2604 2185 1842 1560 1327 1133 971.7 836.5 722.8 627.3 546.3 476.8 417.5 365.9 321.6 284.2 251.9 223.7 199.2 177.9 6.1 5.7 5.4 5.1 4.8 4.5 4.3 4.0 3.8 3.5 3.3 3.0 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.6 4.8 5.0 5.1 5.3 5.4 5.6 5.7 5.9 6.0 6.1 6.3 6.4 6.5 6.6 6.8 6.9 7.0 7.1 1.0 1.0 0.9 0.9 0.9 0.9 0.8 0.8 0.8 0.8 0.7 0.7 0.8 0.8 0.9 1.0 1.1 1.2 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1
(%/K) 6.5 6.2 6.0 5.8 5.6 5.5 5.3 5.1 5.0 4.8 4.7 4.5 4.4 4.3 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.1 3.0 2.9 2.9 2.8 2.7 2.7 2.6 2.5 2.5 2.4 2.4 2.3 2.3
Please read Cautions and warnings and Important notes at the end of this document.
Page 8 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0103J001 2003 B25/100 = 3980 K, R25 = 10000 , TR = 25 C, RR/RR = 5% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 975780 676500 475380 338310 243590 177530 130670 97228 73006 55361 42332 32660 25392 19902 15709 12492 10000 8057 6533 5329 4372 3606 2991 2493 2089 1758 1486 1262 1076 921.6 792.2 683.6 592.5 515.3 449.2 392.8 343.9 301.9 266.5 235.9 209.3 186.2 166.1 878740 611990 431900 308640 223100 163210 120550 90011 67809 51582 39562 30612 23866 18756 14843 11833 9500 7633 6174 5026 4114 3387 2803 2332 1950 1638 1383 1172 997.9 853.0 732.1 630.7 545.8 474.0 412.6 360.3 315.0 276.1 243.5 215.3 190.7 169.4 151.0 1072800 741020 518850 367990 264080 191860 140780 104450 78202 59140 45102 34708 26918 21047 16575 13151 10500 8482 6891 5632 4629 3826 3178 2654 2227 1877 1590 1352 1155 990.1 852.4 736.4 639.1 556.6 485.8 425.3 372.8 327.6 289.5 256.6 227.9 202.9 181.2 9.9 9.5 9.1 8.8 8.4 8.1 7.7 7.4 7.1 6.8 6.5 6.3 6.0 5.8 5.5 5.3 5.0 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.6 6.8 7.0 7.1 7.3 7.4 7.6 7.7 7.9 8.0 8.1 8.3 8.4 8.5 8.6 8.8 8.9 9.0 9.1 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.2 1.2 1.2 1.2 1.2 1.2 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.8 2.9 3.0 3.1 3.2 3.4 3.5 3.6 3.8 3.9 4.0
(%/K) 7.4 7.2 6.9 6.7 6.5 6.2 6.0 5.8 5.6 5.5 5.3 5.1 5.0 4.8 4.7 4.5 4.4 4.3 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.1 3.0 2.9 2.9 2.8 2.7 2.7 2.6 2.5 2.5 2.4 2.4 2.3 2.3
Please read Cautions and warnings and Important notes at the end of this document.
Page 9 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0103F002 2908 B25/100 = 3460 K, R25 = 10000 , TR = 25 C, RR/RR = 1% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 453130 337290 253330 191910 146590 112880 87588 68471 53910 42739 34109 27396 22140 17999 14716 12099 10000 8308 6936 5819 4904 4151 3529 3012 2582 2221 1918 1663 1446 1262 1105 970.2 854.6 755.1 669.0 594.4 529.5 472.9 423.4 380.0 341.9 308.3 278.6 429090 320600 241650 183680 140770 108730 84620 66339 52375 41631 33308 26817 21722 17699 14502 11948 9900 8205 6837 5725 4816 4070 3454 2944 2519 2164 1866 1615 1403 1222 1069 937.4 824.7 727.7 644.0 571.5 508.5 453.6 405.7 363.8 326.9 294.5 265.8 477170 353990 265010 200130 152420 117030 90556 70602 55446 43848 34910 27974 22557 18298 14930 12250 10100 8411 7035 5912 4991 4232 3603 3081 2644 2278 1970 1710 1489 1301 1141 1003 884.6 782.4 694.0 617.3 550.5 492.2 441.1 396.3 356.9 322.1 291.3 5.3 5.0 4.6 4.3 4.0 3.7 3.4 3.1 2.8 2.6 2.3 2.1 1.9 1.7 1.5 1.2 1.0 1.2 1.4 1.6 1.8 1.9 2.1 2.3 2.4 2.6 2.7 2.9 3.0 3.1 3.3 3.4 3.5 3.6 3.7 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 0.9 0.9 0.8 0.8 0.7 0.7 0.7 0.6 0.6 0.6 0.5 0.5 0.4 0.4 0.4 0.3 0.3 0.3 0.4 0.5 0.5 0.6 0.7 0.7 0.8 0.9 0.9 1.0 1.1 1.2 1.2 1.3 1.4 1.5 1.6 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3
(%/K) 6.0 5.8 5.6 5.5 5.3 5.1 5.0 4.9 4.7 4.6 4.4 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 3.0 2.9 2.8 2.8 2.7 2.6 2.6 2.5 2.4 2.4 2.3 2.3 2.2 2.2 2.1 2.1 2.0 2.0
Please read Cautions and warnings and Important notes at the end of this document.
Page 10 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0103H002 2908 B25/100 = 3460 K, R25 = 10000 , TR = 25 C, RR/RR = 3% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 453130 337290 253330 191910 146590 112880 87588 68471 53910 42739 34109 27396 22140 17999 14716 12099 10000 8308 6936 5819 4904 4151 3529 3012 2582 2221 1918 1663 1446 1262 1105 970.2 854.6 755.1 669.0 594.4 529.5 472.9 423.4 380.0 341.9 308.3 278.6 420030 313850 236580 179850 137840 106470 82868 64970 51296 40776 32626 26269 21280 17339 14208 11706 9700 8038 6698 5609 4718 3987 3384 2884 2468 2120 1828 1582 1374 1197 1047 918.0 807.6 712.6 630.6 559.6 497.9 444.2 397.3 356.2 320.1 288.3 260.3 486230 360740 270070 203970 155350 119280 92307 71971 56524 44702 35592 28522 23000 18658 15224 12492 10300 8577 7174 6028 5089 4315 3674 3141 2696 2323 2009 1743 1518 1327 1163 1022 901.7 797.5 707.4 629.2 561.1 501.6 449.6 403.9 363.7 328.3 296.9 7.3 7.0 6.6 6.3 6.0 5.7 5.4 5.1 4.8 4.6 4.3 4.1 3.9 3.7 3.5 3.2 3.0 3.2 3.4 3.6 3.8 3.9 4.1 4.3 4.4 4.6 4.7 4.9 5.0 5.1 5.3 5.4 5.5 5.6 5.7 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 1.2 1.2 1.2 1.1 1.1 1.1 1.1 1.1 1.0 1.0 1.0 1.0 0.9 0.9 0.9 0.8 0.8 0.9 1.0 1.0 1.1 1.2 1.3 1.4 1.5 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.2 3.3
(%/K) 6.0 5.8 5.6 5.5 5.3 5.1 5.0 4.9 4.7 4.6 4.4 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 3.0 2.9 2.8 2.8 2.7 2.6 2.6 2.5 2.4 2.4 2.3 2.3 2.2 2.2 2.1 2.1 2.0 2.0
Please read Cautions and warnings and Important notes at the end of this document.
Page 11 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0103J002 2908 B25/100 = 3460 K, R25 = 10000 , TR = 25 C, RR/RR = 5% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 453130 337290 253330 191910 146590 112880 87588 68471 53910 42739 34109 27396 22140 17999 14716 12099 10000 8308 6936 5819 4904 4151 3529 3012 2582 2221 1918 1663 1446 1262 1105 970.2 854.6 755.1 669.0 594.4 529.5 472.9 423.4 380.0 341.9 308.3 278.6 410960 307100 231510 176010 134900 104210 81117 63600 50218 39921 31943 25721 20837 16979 13914 11464 9500 7872 6560 5492 4620 3904 3313 2824 2416 2075 1789 1549 1345 1172 1025 898.5 790.5 697.5 617.2 547.7 487.3 434.7 388.8 348.6 313.2 282.1 254.7 495300 367480 275140 207810 158280 121540 94059 73341 57602 45557 36274 29070 23442 19018 15519 12734 10500 8743 7312 6145 5187 4398 3744 3201 2748 2367 2047 1777 1547 1352 1185 1042 918.8 812.6 720.8 641.1 571.6 511.1 458.0 411.5 370.5 334.4 302.5 9.3 9.0 8.6 8.3 8.0 7.7 7.4 7.1 6.8 6.6 6.3 6.1 5.9 5.7 5.5 5.2 5.0 5.2 5.4 5.6 5.8 5.9 6.1 6.3 6.4 6.6 6.7 6.9 7.0 7.1 7.3 7.4 7.5 7.6 7.7 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 1.6 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.8 2.9 3.0 3.1 3.2 3.4 3.5 3.6 3.7 3.9 4.0 4.1 4.3
(%/K) 6.0 5.8 5.6 5.5 5.3 5.1 5.0 4.9 4.7 4.6 4.4 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 3.0 2.9 2.8 2.8 2.7 2.6 2.6 2.5 2.4 2.4 2.3 2.3 2.2 2.2 2.1 2.1 2.0 2.0
Please read Cautions and warnings and Important notes at the end of this document.
Page 12 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0103F003 2001 B25/100 = 3920 K, R25 = 10000 , TR = 25 C, RR/RR = 1% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 877620 619220 441680 318330 231730 170300 126210 94515 71273 54270 41522 32063 25019 19679 15623 12488 10000 8110 6593 5392 4434 3667 3051 2551 2146 1813 1536 1306 1116 956.1 823.5 711.8 617.8 538.0 469.7 411.3 361.4 318.5 281.5 249.5 221.6 197.2 176.1 826090 585350 419220 303320 221620 163450 121540 91314 69073 52751 40475 31340 24520 19336 15387 12329 9900 8008 6496 5302 4351 3592 2983 2489 2090 1763 1491 1266 1079 923.5 794.2 685.5 594.1 516.7 450.4 393.9 345.7 304.2 268.6 237.8 210.9 187.5 167.2 929150 653080 464130 333340 241840 177160 130880 97717 73474 55789 42569 32785 25518 20023 15858 12648 10100 8213 6690 5483 4518 3743 3120 2613 2202 1863 1581 1347 1152 988.6 852.7 738.1 641.5 559.3 488.9 428.7 377.1 332.7 294.5 261.3 232.3 207.0 184.9 5.9 5.5 5.1 4.7 4.4 4.0 3.7 3.4 3.1 2.8 2.5 2.3 2.0 1.7 1.5 1.3 1.0 1.3 1.5 1.7 1.9 2.1 2.3 2.4 2.6 2.8 2.9 3.1 3.3 3.4 3.5 3.7 3.8 4.0 4.1 4.2 4.4 4.5 4.6 4.7 4.8 4.9 5.0 0.8 0.8 0.8 0.7 0.7 0.7 0.6 0.6 0.6 0.5 0.5 0.4 0.4 0.4 0.3 0.3 0.2 0.3 0.4 0.4 0.5 0.6 0.6 0.7 0.8 0.8 0.9 1.0 1.0 1.1 1.2 1.3 1.4 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.1 2.2
(%/K) 7.0 6.8 6.7 6.5 6.3 6.1 5.9 5.7 5.5 5.4 5.2 5.0 4.9 4.7 4.6 4.5 4.3 4.2 4.1 4.0 3.8 3.7 3.6 3.5 3.4 3.4 3.3 3.2 3.1 3.0 3.0 2.9 2.8 2.7 2.7 2.6 2.6 2.5 2.5 2.4 2.3 2.3 2.2
Please read Cautions and warnings and Important notes at the end of this document.
Page 13 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0103H003 2001 B25/100 = 3920 K, R25 = 10000 , TR = 25 C, RR/RR = 3% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 877620 619220 441680 318330 231730 170300 126210 94515 71273 54270 41522 32063 25019 19679 15623 12488 10000 8110 6593 5392 4434 3667 3051 2551 2146 1813 1536 1306 1116 956.1 823.5 711.8 617.8 538.0 469.7 411.3 361.4 318.5 281.5 249.5 221.6 197.2 176.1 808540 572970 410390 296960 216990 160040 119010 89424 67648 51666 39645 30699 24019 18942 15075 12080 9700 7846 6364 5194 4263 3518 2922 2438 2047 1727 1460 1240 1057 904.4 777.8 671.3 581.8 505.9 441.1 385.7 338.5 297.9 263.0 232.8 206.5 183.5 163.7 946710 665470 472970 339710 246470 180560 133400 99607 74899 56874 43399 33426 26019 20417 16170 12897 10300 8375 6822 5591 4606 3817 3181 2664 2244 1900 1612 1373 1174 1008 869.2 752.3 653.8 570.1 498.3 436.9 384.4 339.1 300.1 266.3 236.7 210.9 188.5 7.9 7.5 7.1 6.7 6.4 6.0 5.7 5.4 5.1 4.8 4.5 4.3 4.0 3.7 3.5 3.3 3.0 3.3 3.5 3.7 3.9 4.1 4.3 4.4 4.6 4.8 4.9 5.1 5.3 5.4 5.5 5.7 5.8 6.0 6.1 6.2 6.4 6.5 6.6 6.7 6.8 6.9 7.0 1.1 1.1 1.1 1.0 1.0 1.0 1.0 0.9 0.9 0.9 0.9 0.8 0.8 0.8 0.8 0.7 0.7 0.8 0.9 0.9 1.0 1.1 1.2 1.3 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1
(%/K) 7.0 6.8 6.7 6.5 6.3 6.1 5.9 5.7 5.5 5.4 5.2 5.0 4.9 4.7 4.6 4.5 4.3 4.2 4.1 4.0 3.8 3.7 3.6 3.5 3.4 3.4 3.3 3.2 3.1 3.0 3.0 2.9 2.8 2.7 2.7 2.6 2.6 2.5 2.5 2.4 2.3 2.3 2.2
Please read Cautions and warnings and Important notes at the end of this document.
Page 14 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0103J003 2001 B25/100 = 3920 K, R25 = 10000 , TR = 25 C, RR/RR = 5% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 877620 619220 441680 318330 231730 170300 126210 94515 71273 54270 41522 32063 25019 19679 15623 12488 10000 8110 6593 5392 4434 3667 3051 2551 2146 1813 1536 1306 1116 956.1 823.5 711.8 617.8 538.0 469.7 411.3 361.4 318.5 281.5 249.5 221.6 197.2 176.1 790990 560580 401560 290590 212350 156640 116490 87533 66222 50580 38815 30058 23519 18549 14762 11830 9500 7683 6232 5086 4174 3445 2861 2387 2004 1690 1429 1214 1035 885.3 761.3 657.0 569.4 495.1 431.7 377.5 331.2 291.5 257.3 227.8 202.0 179.6 160.1 964260 677850 481800 346080 251110 183970 135920 101500 76325 57960 44230 34068 26519 20810 16483 13147 10500 8538 6954 5699 4695 3890 3242 2715 2287 1936 1643 1399 1196 1027 885.6 766.6 666.2 580.9 507.7 445.2 391.6 345.5 305.7 271.3 241.1 214.8 192.0 9.9 9.5 9.1 8.7 8.4 8.0 7.7 7.4 7.1 6.8 6.5 6.3 6.0 5.7 5.5 5.3 5.0 5.3 5.5 5.7 5.9 6.1 6.3 6.4 6.6 6.8 6.9 7.1 7.3 7.4 7.5 7.7 7.8 8.0 8.1 8.2 8.4 8.5 8.6 8.7 8.8 8.9 9.0 1.4 1.4 1.4 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.2 1.2 1.2 1.2 1.2 1.2 1.3 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.9 3.0 3.1 3.3 3.4 3.5 3.6 3.8 3.9 4.0
(%/K) 7.0 6.8 6.7 6.5 6.3 6.1 5.9 5.7 5.5 5.4 5.2 5.0 4.9 4.7 4.6 4.5 4.3 4.2 4.1 4.0 3.8 3.7 3.6 3.5 3.4 3.4 3.3 3.2 3.1 3.0 3.0 2.9 2.8 2.7 2.7 2.6 2.6 2.5 2.5 2.4 2.3 2.3 2.2
Please read Cautions and warnings and Important notes at the end of this document.
Page 15 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0123F000 2901 B25/100 = 3760 K, R25 = 12000 , TR = 25 C, RR/RR = 1% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 767630 554140 404850 299120 223330 168400 128150 98376 75748 58816 45852 36033 28562 22799 18308 14796 12000 9801 8060 6663 5531 4615 3862 3248 2749 2336 1993 1707 1466 1264 1095 951.4 828.7 724.1 634.6 557.8 491.8 434.8 385.2 342.1 304.5 271.6 242.8 724060 524840 384940 285460 213890 161830 123550 95138 73472 57212 44724 35238 28003 22408 18036 14609 11880 9678 7942 6553 5430 4522 3777 3171 2679 2273 1936 1655 1420 1222 1057 917.3 797.9 696.2 609.4 534.9 471.1 416.0 368.1 326.5 290.3 258.6 230.9 811190 583450 424770 312780 232770 174970 132750 101610 78023 60421 46980 36827 29121 23191 18580 14983 12120 9925 8178 6773 5633 4709 3947 3325 2819 2399 2050 1758 1512 1306 1133 985.5 859.6 751.9 659.8 580.6 512.6 453.6 402.4 357.7 318.7 284.6 254.6 5.7 5.3 4.9 4.6 4.2 3.9 3.6 3.3 3.0 2.7 2.5 2.2 2.0 1.7 1.5 1.3 1.0 1.3 1.5 1.7 1.8 2.0 2.2 2.4 2.5 2.7 2.9 3.0 3.2 3.3 3.4 3.6 3.7 3.8 4.0 4.1 4.2 4.3 4.4 4.6 4.7 4.8 4.9 0.9 0.8 0.8 0.8 0.7 0.7 0.7 0.6 0.6 0.5 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.3 0.4 0.4 0.5 0.6 0.6 0.7 0.8 0.8 0.9 1.0 1.1 1.1 1.2 1.3 1.4 1.4 1.5 1.6 1.7 1.8 1.9 1.9 2.0 2.1 2.2
(%/K) 6.4 6.3 6.1 6.0 5.8 5.6 5.5 5.3 5.1 5.0 4.9 4.7 4.6 4.5 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.2 3.1 3.0 2.9 2.9 2.8 2.7 2.7 2.6 2.6 2.5 2.4 2.4 2.3 2.3 2.3 2.2
Please read Cautions and warnings and Important notes at the end of this document.
Page 16 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0123H000 2901 B25/100 = 3760 K, R25 = 12000 , TR = 25 C, RR/RR = 3% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 767630 554140 404850 299120 223330 168400 128150 98376 75748 58816 45852 36033 28562 22799 18308 14796 12000 9801 8060 6663 5531 4615 3862 3248 2749 2336 1993 1707 1466 1264 1095 951.4 828.7 724.1 634.6 557.8 491.8 434.8 385.2 342.1 304.5 271.6 242.8 708710 513760 376840 279480 209420 158460 120990 93170 71957 56036 43807 34518 27432 21952 17670 14313 11640 9482 7781 6420 5319 4429 3700 3106 2624 2226 1896 1621 1390 1197 1035 898.3 781.4 681.7 596.7 523.8 461.2 407.3 360.4 319.7 284.2 253.2 226.1 826540 594530 432870 318760 237240 178340 135320 103580 79538 61597 47897 37548 29692 23647 18947 15279 12360 10121 8339 6907 5744 4801 4024 3390 2874 2446 2090 1792 1542 1331 1154 1005 876.1 766.4 672.5 591.8 522.4 462.3 410.1 364.6 324.8 290.0 259.5 7.7 7.3 6.9 6.6 6.2 5.9 5.6 5.3 5.0 4.7 4.5 4.2 4.0 3.7 3.5 3.3 3.0 3.3 3.5 3.7 3.8 4.0 4.2 4.4 4.5 4.7 4.9 5.0 5.2 5.3 5.4 5.6 5.7 5.8 6.0 6.1 6.2 6.3 6.4 6.6 6.7 6.8 6.9 1.2 1.2 1.1 1.1 1.1 1.1 1.0 1.0 1.0 0.9 0.9 0.9 0.9 0.8 0.8 0.8 0.7 0.8 0.9 1.0 1.0 1.1 1.2 1.3 1.4 1.5 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1
(%/K) 6.4 6.3 6.1 6.0 5.8 5.6 5.5 5.3 5.1 5.0 4.9 4.7 4.6 4.5 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.2 3.1 3.0 2.9 2.9 2.8 2.7 2.7 2.6 2.6 2.5 2.4 2.4 2.3 2.3 2.3 2.2
Please read Cautions and warnings and Important notes at the end of this document.
Page 17 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0123J000 2901 B25/100 = 3760 K, R25 = 12000 , TR = 25 C, RR/RR = 5% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 767630 554140 404850 299120 223330 168400 128150 98376 75748 58816 45852 36033 28562 22799 18308 14796 12000 9801 8060 6663 5531 4615 3862 3248 2749 2336 1993 1707 1466 1264 1095 951.4 828.7 724.1 634.6 557.8 491.8 434.8 385.2 342.1 304.5 271.6 242.8 693360 502670 368740 273500 204960 155090 118420 91203 70442 54860 42890 33797 26860 21496 17303 14017 11400 9286 7620 6287 5208 4337 3622 3041 2569 2180 1856 1587 1361 1172 1013 879.2 764.8 667.3 584.0 512.6 451.4 398.6 352.7 312.8 278.1 247.8 221.2 841890 605620 440960 324740 241710 181710 137880 105550 81053 62773 48815 38268 30263 24103 19313 15575 12600 10317 8500 7040 5855 4893 4102 3455 2929 2493 2130 1826 1571 1356 1176 1024 892.7 780.9 685.2 603.0 532.2 471.0 417.8 371.4 330.9 295.4 264.3 9.7 9.3 8.9 8.6 8.2 7.9 7.6 7.3 7.0 6.7 6.5 6.2 6.0 5.7 5.5 5.3 5.0 5.3 5.5 5.7 5.8 6.0 6.2 6.4 6.5 6.7 6.9 7.0 7.2 7.3 7.4 7.6 7.7 7.8 8.0 8.1 8.2 8.3 8.4 8.6 8.7 8.8 8.9 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.2 3.3 3.4 3.5 3.6 3.8 3.9 4.0
(%/K) 6.4 6.3 6.1 6.0 5.8 5.6 5.5 5.3 5.1 5.0 4.9 4.7 4.6 4.5 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.2 3.1 3.0 2.9 2.9 2.8 2.7 2.7 2.6 2.6 2.5 2.4 2.4 2.3 2.3 2.3 2.2
Please read Cautions and warnings and Important notes at the end of this document.
Page 18 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0303F000 8018 B25/100 = 3964 K, R25 = 30000 , TR = 25 C, RR/RR = 1% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 2472200 1750300 1253200 907060 663280 489810 365130 274640 208370 159410 122920 95501 74745 58911 46745 37332 30000 24253 19720 16123 13252 10949 9091 7584 6356 5351 4524 3840 3273 2800 2405 2073 1792 1555 1354 1182 1036 910.0 801.7 708.3 627.4 557.2 496.1 2325700 1653700 1189000 863910 634100 469940 351510 265270 201890 154910 119800 93336 73245 57877 46038 36855 29700 23945 19428 15851 13002 10721 8885 7399 6189 5201 4390 3720 3166 2704 2319 1995 1723 1493 1298 1132 990.3 868.9 764.6 674.6 596.9 529.5 470.9 2618700 1846900 1317500 950200 692460 509680 378740 284020 214850 163900 126030 97666 76244 59944 47451 37808 30300 24561 20012 16395 13502 11177 9297 7770 6523 5500 4657 3960 3380 2896 2491 2150 1862 1618 1410 1233 1081 951.0 838.9 741.9 658.0 585.0 521.4 5.9 5.5 5.1 4.8 4.4 4.1 3.7 3.4 3.1 2.8 2.5 2.3 2.0 1.8 1.5 1.3 1.0 1.3 1.5 1.7 1.9 2.1 2.3 2.4 2.6 2.8 3.0 3.1 3.3 3.4 3.6 3.7 3.9 4.0 4.1 4.3 4.4 4.5 4.6 4.8 4.9 5.0 5.1 0.8 0.8 0.8 0.7 0.7 0.7 0.6 0.6 0.6 0.5 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.3 0.4 0.4 0.5 0.6 0.6 0.7 0.8 0.8 0.9 1.0 1.0 1.1 1.2 1.3 1.3 1.4 1.5 1.6 1.7 1.8 1.8 1.9 2.0 2.1 2.2
(%/K) 7.0 6.8 6.6 6.4 6.2 6.0 5.8 5.6 5.4 5.3 5.1 5.0 4.8 4.7 4.6 4.4 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.2 3.1 3.0 2.9 2.9 2.8 2.7 2.7 2.6 2.6 2.5 2.5 2.4 2.3 2.3
Please read Cautions and warnings and Important notes at the end of this document.
Page 19 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0303H000 8018 B25/100 = 3964 K, R25 = 30000 , TR = 25 C, RR/RR = 3% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 2472200 1750300 1253200 907060 663280 489810 365130 274640 208370 159410 122920 95501 74745 58911 46745 37332 30000 24253 19720 16123 13252 10949 9091 7584 6356 5351 4524 3840 3273 2800 2405 2073 1792 1555 1354 1182 1036 910.0 801.7 708.3 627.4 557.2 496.1 2276300 1618700 1163900 845770 620830 460140 344210 259780 197730 151720 117340 91426 71750 56699 45103 36108 29100 23460 19033 15528 12737 10503 8703 7247 6062 5094 4299 3643 3100 2648 2271 1954 1687 1462 1271 1108 969.6 850.7 748.5 660.5 584.4 518.4 461.0 2668200 1881900 1342600 968340 705730 519480 386040 289510 219020 167090 128490 99576 77739 61122 48386 38555 30900 25046 20406 16717 13767 11396 9479 7921 6650 5607 4748 4037 3446 2952 2539 2191 1897 1649 1437 1257 1102 969.2 854.9 756.1 670.5 596.1 531.3 7.9 7.5 7.1 6.8 6.4 6.1 5.7 5.4 5.1 4.8 4.5 4.3 4.0 3.8 3.5 3.3 3.0 3.3 3.5 3.7 3.9 4.1 4.3 4.4 4.6 4.8 5.0 5.1 5.3 5.4 5.6 5.7 5.9 6.0 6.1 6.3 6.4 6.5 6.6 6.8 6.9 7.0 7.1 1.1 1.1 1.1 1.1 1.0 1.0 1.0 1.0 0.9 0.9 0.9 0.9 0.8 0.8 0.8 0.7 0.7 0.8 0.9 0.9 1.0 1.1 1.2 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.8 2.9 3.0 3.1
(%/K) 7.0 6.8 6.6 6.4 6.2 6.0 5.8 5.6 5.4 5.3 5.1 5.0 4.8 4.7 4.6 4.4 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.2 3.1 3.0 2.9 2.9 2.8 2.7 2.7 2.6 2.6 2.5 2.5 2.4 2.3 2.3
Please read Cautions and warnings and Important notes at the end of this document.
Page 20 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
R/T No. T (C) 55.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0 135.0 140.0 145.0 150.0 155.0
B57885S0303J000 8018 B25/100 = 3964 K, R25 = 30000 , TR = 25 C, RR/RR = 5% Rnom[] Rmin[] Rmax[] RR/RR[%] T[C] 2472200 1750300 1253200 907060 663280 489810 365130 274640 208370 159410 122920 95501 74745 58911 46745 37332 30000 24253 19720 16123 13252 10949 9091 7584 6356 5351 4524 3840 3273 2800 2405 2073 1792 1555 1354 1182 1036 910.0 801.7 708.3 627.4 557.2 496.1 2226900 1583700 1138800 827630 607570 450340 336910 254280 193560 148540 114880 89516 70255 55521 44168 35362 28500 22975 18639 15206 12472 10284 8521 7095 5935 4987 4209 3567 3035 2592 2223 1912 1651 1431 1244 1085 948.9 832.5 732.5 646.3 571.8 507.2 451.1 2717600 1916900 1367700 986480 718990 529280 393350 295000 223190 170270 130950 101490 79234 62301 49321 39302 31500 25531 20801 17040 14032 11615 9660 8073 6777 5714 4838 4114 3511 3008 2587 2233 1933 1680 1464 1280 1123 987.4 870.9 770.3 683.1 607.3 541.2 9.9 9.5 9.1 8.8 8.4 8.1 7.7 7.4 7.1 6.8 6.5 6.3 6.0 5.8 5.5 5.3 5.0 5.3 5.5 5.7 5.9 6.1 6.3 6.4 6.6 6.8 7.0 7.1 7.3 7.4 7.6 7.7 7.9 8.0 8.1 8.3 8.4 8.5 8.6 8.8 8.9 9.0 9.1 1.4 1.4 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.3 1.3 1.3 1.2 1.2 1.2 1.2 1.2 1.3 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.6 3.7 3.8 4.0
(%/K) 7.0 6.8 6.6 6.4 6.2 6.0 5.8 5.6 5.4 5.3 5.1 5.0 4.8 4.7 4.6 4.4 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.2 3.1 3.0 2.9 2.9 2.8 2.7 2.7 2.6 2.6 2.5 2.5 2.4 2.3 2.3
Please read Cautions and warnings and Important notes at the end of this document.
Page 21 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Taping and packing 1 Taping of radial leaded NTC thermistors
Dimensions and tolerances Lead spacing F = 2.5 mm and 5.0 mm (taping to IEC 60286-2)
Dimensions (mm) Lead spacing 2.5 mm 11.0 5.0 0.5/0.6 12.7 5.1 2.5 0 0 18.0 5.5 9.0 3.0 18.0 16.0 32.2 4.0 0.9 11.0 4.0 Lead spacing 5 mm 11.5 6.0 0.5/0.6 12.7 3.85 5.0 0 0 18.0 5.5 9.0 3.0 18.0 16.0 32.2 4.0 0.9 11.0 4.0 Tolerance of lead spacing 2.5/5 mm max. max. 0.05 0.3 0.7 +0.6/ 0.1 2.0 1.3 0.5 min. +0.75/ 0.5 max. +2.0/ 0 0.5 max. 0.2 max. max. max. Remarks
b s d P0 P1 F h p W W0 W1 W2 H H0 H1 D0 t L L1
1 mm / 20 sprocket holes
measured at top of component body
peel-off force 5 N
without wires
Please read Cautions and warnings and Important notes at the end of this document.
Page 22 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Types of packing Ammo packing Ammo type I x 80 y 240 z 210
Packing unit: 1000 - 2000 pcs./reel Reel packing
Packing unit: 1000 - 2000 pcs./reel Reel dimensions (in mm) Reel type I II d 360 max. 500 max. f 31 1 23 1
Page 23 of 33
n approx. 45 approx. 59
w 54 max. 72 max.
Please read Cautions and warnings and Important notes at the end of this document.
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Cassette packing
Packing unit: 1000 - 2000 pcs./cassette Bulk packing The components are packed in cardboard boxes, the size of which depends on the order quantity.
Please read Cautions and warnings and Important notes at the end of this document.
Page 24 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
2
Packing codes
The last two digits of the complete ordering code state the packing mode: Last two digits 00, 01, 02, 03,04, 05, 06, 07, 08 40 45 50 51 52 53 54 55 60 62 70 72 Radial leads, kinked Radial leads, kinked Radial leads, straight Radial leads, straight Radial leads, kinked Radial leads, straight SMD SMD SMD SMD Bulk Bulk Bulk Cardboard tape Cardboard tape Cardboard tape Cardboard tape Cardboard tape Cardboard tape Cardboard tape Blister tape Cardboard tape Blister tape Cassette packing 360 or 500-mm reel packing Cassette packing 360 or 500-mm reel packing AMMO packing AMMO packing 180-mm reel packing 180-mm reel packing 330-mm reel packing 330-mm reel packing
(If no packing code is indicated, this corresponds to 40) Example 1: Example 2: B57164K0102J000 B57164K0102J052 B57881S0103F002 B57881S0103F251 Bulk Cardboard tape, cassette packing Bulk Cardboard tape, reel packing
Please read Cautions and warnings and Important notes at the end of this document.
Page 25 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Mounting instructions 1 1.1 Soldering Leaded NTC thermistors
Leaded thermistors comply with the solderability requirements specified by CECC. When soldering, care must be taken that the NTC thermistors are not damaged by excessive heat. The following maximum temperatures, maximum time spans and minimum distances have to be observed: Dip soldering Bath temperature Soldering time Distance from thermistor max. 260 C max. 4 s min. 6 mm Iron soldering max. 360 C max. 2 s min. 6 mm
Under more severe soldering conditions the resistance may change. 1.2 Leadless NTC thermistors
In case of NTC thermistors without leads, soldering is restricted to devices which are provided with a solderable metallization. The temperature shock caused by the application of hot solder may produce fine cracks in the ceramic, resulting in changes in resistance. To prevent leaching of the metallization, solder with silver additives or with a low tin content should be used. In addition, soldering methods should be employed which permit short soldering times.
2
Clamp contacting
Pressure contacting by means of clamps is particularly suitable for applications involving frequent switching and high turn-on powers. 3 Robustness of terminations (leaded types)
The leads meet the requirements of IEC 60068-2-21. They may not be bent closer than 4 mm from the solder joint on the thermistor body or from the point at which they leave the feedthroughs. During bending, any mechanical stress at the outlet of the leads must be removed. The bending radius should be at least 0.75 mm. Tensile strength: Test Ua1: Leads 0.25 < 0.35 < 0.50 < 0.80 < 0.25 mm = 1.0 N 0.35 mm = 2.5 N 0.50 mm = 5.0 N 0.80 mm = 10.0 N 1.25 mm = 20.0 N
Please read Cautions and warnings and Important notes at the end of this document.
Page 26 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Bending strength: Test Ub: Two 90-bends in opposite directions at a weight of 0.25 kg. Torsional strength: Test Uc: severity 2 The lead is bent by 90 at a distance of 6 to 6.5 mm from the thermistor body. The bending radius of the leads should be approx. 0.75 mm. Two torsions of 180 each (severity 2). When subjecting leads to mechanical stress, the following should be observed: Tensile stress on leads During mounting and operation tensile forces on the leads are to be avoided. Bending of leads Bending of the leads directly on the thermistor body is not permissible. A lead may be bent at a minimum distance of twice the wire's diameter +2 mm from the solder joint on the thermistor body. During bending the wire must be mechanically relieved at its outlet. The bending radius should be at least 0.75 mm. Twisting of leads The twisting (torsion) by 180 of a lead bent by 90 is permissible at 6 mm from the bottom of the thermistor body. 4 Sealing and potting
When thermistors are sealed, potted or overmolded, there must be no mechanical stress caused by thermal expansion during the production process (curing / overmolding process) and during later operation. The upper category temperature of the thermistor must not be exceeded. Ensure that the materials used (sealing / potting compound and plastic material) are chemically neutral. 5 Cleaning
If cleaning is necessary, mild cleaning agents such as ethyl alcohol and cleaning gasoline are recommended. Cleaning agents based on water are not allowed. Ultrasonic cleaning methods are permissible. 6 Storage
In order to maintain their solderability, thermistors must be stored in a non-corrosive atmosphere. Humidity, temperature and container materials are critical factors. Do not store SMDs where they are exposed to heat or direct sunlight. Otherwise, the packing material may be deformed or SMDs may stick together, causing problems during mounting. After opening the factory seals, such as polyvinyl-sealed packages, use the SMDs as soon as possible.
Please read Cautions and warnings and Important notes at the end of this document.
Page 27 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
The components should be left in the original packing. Touching the metallization of unsoldered thermistors may change their soldering properties. Storage temperature: Relative humidity (without condensation): 25 C up to 45 C 75% annual mean
<95%, maximum 30 days per annum Solder the thermistors listed in this data book after shipment from EPCOS within the time specified: SMDs: Leaded components: 12 months 24 months
Please read Cautions and warnings and Important notes at the end of this document.
Page 28 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Cautions and warnings General See "Important notes" at the end of this document. Storage Store thermistors only in original packaging. Do not open the package prior to storage. Storage conditions in original packaging: storage temperature 25 C ... +45 C, relative humidity 75% annual mean, <95% maximum 30 days per annum, dew precipitation is inadmissible. Do not store thermistors where they are exposed to heat or direct sunlight. Otherwise, the packing material may be deformed or components may stick together, causing problems during mounting. Avoid contamination of thermistor surface during storage, handling and processing. Avoid storage of thermistors in harmful environments like corrosive gases (SOx, Cl etc). Use the components as soon as possible after opening the factory seals, i.e. the polyvinyl-sealed packages. Solder thermistors within the time specified after shipment from EPCOS. For leaded components this is 24 months, for SMDs 12 months. Handling NTC thermistors must not be dropped. Chip-offs or any other damage must not be caused during handling of NTCs. Do not touch components with bare hands. Gloves are recommended. Avoid contamination of thermistor surface during handling. Bending / twisting leads A lead (wire) may be bent at a minimum distance of twice the wire's diameter plus 4 mm from the component head or housing. When bending ensure the wire is mechanically relieved at the component head or housing. The bending radius should be at least 0.75 mm. Twisting (torsion) by 180 of a lead bent by 90 is permissible at 6 mm from the bottom of the thermistor body. Soldering Use resin-type flux or non-activated flux. Insufficient preheating may cause ceramic cracks. Rapid cooling by dipping in solvent is not recommended. Complete removal of flux is recommended.
Please read Cautions and warnings and Important notes at the end of this document.
Page 29 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Mounting Ensure that no thermo-mechanical stress occurs due to production processes (curing or overmolding processes) when thermistors are sealed, potted or overmolded or during their subsequent operation. The maximum temperature of the thermistor must not be exceeded. Ensure that the materials used (sealing/potting compound and plastic material) are chemically neutral. Electrodes/contacts must not be scratched or damaged before/during/after the mounting process. Contacts and housing used for assembly with the thermistor must be clean before mounting. Ensure that adjacent materials are designed for operation at temperatures comparable to the surface temperature of the thermistor. Be sure that surrounding parts and materials can withstand the temperature. Avoid contamination of the thermistor surface during processing. The connections of sensors (e.g. cable end, wire end, plug terminal) may only be exposed to an environment with normal atmospheric conditions. Tensile forces on cables or leads must be avoided during mounting and operation. Bending or twisting of cables or leads directly on the thermistor body is not permissible. Avoid using chemical substances as mounting aids. It must be ensured that no water or other liquids enter the NTC thermistors (e.g. through plug terminals). In particular, water based substances (e.g. soap suds) must not be used as mounting aids for sensors. Operation Use thermistors only within the specified operating temperature range. Use thermistors only within the specified power range. Environmental conditions must not harm the thermistors. Only use the thermistors under normal atmospheric conditions or within the specified conditions. Contact of NTC thermistors with any liquids and solvents should be prevented. It must be ensured that no water enters the NTC thermistors (e.g. through plug terminals). For measurement purposes (checking the specified resistance vs. temperature), the component must not be immersed in water but in suitable liquids (e.g. Galden). Avoid dewing and condensation unless thermistor is specified for these conditions. Bending or twisting of cables and/or wires is not permissible during operation of the sensor in the application. Be sure to provide an appropriate fail-safe function to prevent secondary product damage caused by malfunction. This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.
Please read Cautions and warnings and Important notes at the end of this document.
Page 30 of 33
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Symbols and terms Symbol A AWG B B25/100 Cth I N P25 Pdiss Pel Pmax RB/RB Rins RP RR RR/RR RS RT T T t TA Tmax Tmin Top TR Tsurf V Vins Vop Vtest English Area American Wire Gauge B value B value determined by resistance measurement at 25 C and 100 C Heat capacitance Current Number (integer) Maximum power at 25 C Power dissipation Electrical power Maximum power within stated temperature range Resistance tolerance caused by spread of B value Insulation resistance Parallel resistance Rated resistance Resistance tolerance Series resistance Resistance at temperature T (e.g. R25 = resistance at 25 C) Temperature Temperature tolerance Time Ambient temperature Upper category temperature Lower category temperature Operating temperature Rated temperature Surface temperature Voltage Insulation test voltage Operating voltage Test voltage German Flache Amerikanische Norm fur Drahtquerschnitte B-Wert B-Wert, ermittelt durch Widerstandsmessungen bei 25 C und 100 C Warmekapazitat Strom Anzahl (ganzzahliger Wert) Maximale Leistung bei 25 C Verlustleistung Elektrische Leistung Maximale Leistung im angegebenenTemperaturbereich Widerstandstoleranz, die durch die Streuung des B-Wertes verursacht wird Isolationswiderstand Parallelwiderstand Nennwiderstand Widerstandstoleranz Serienwiderstand Widerstand bei Temperatur T (z.B. R25 = Widerstand bei 25 C) Temperatur Temperaturtoleranz Zeit Umgebungstemperatur Obere Grenztemperatur (Kategorietemperatur) Untere Grenztemperatur (Kategorietemperatur) Betriebstemperatur Nenntemperatur Oberflachentemperatur Spannung Isolationsprufspannung Betriebsspannung Prufspannung
Page 31 of 33
Please read Cautions and warnings and Important notes at the end of this document.
Temperature measurement and compensation Leaded NTC thermistors, lead spacing 5 mm
B57885S S885
Symbol th c a
English Temperature coefficient Tolerance, change Dissipation factor Thermal cooling time constant Thermal time constant
German Temperaturkoeffizient Toleranz, Anderung Warmeleitwert Thermische Abkuhlzeitkonstante Thermische Zeitkonstante
Abbreviations / Notes Symbol English Surface-mounted devices * + German Oberflachenmontierbares Bauelement
To be replaced by a number in ordering Platzhalter fur Zahl im Bestellnummerncodes, type designations etc. code oder fur die Typenbezeichnung. To be replaced by a letter. All dimensions are given in mm. The commas used in numerical values denote decimal points. Platzhalter fur einen Buchstaben. Alle Mae sind in mm angegeben. Verwendete Kommas in Zahlenwerten bezeichnen Dezimalpunkte.
Please read Cautions and warnings and Important notes at the end of this document.
Page 32 of 33
Important notes
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Page 33 of 33

▲Up To Search▲

Price & Availability of B57885S0303F000

	To Download B57885S0303F000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .